Click
here to enlarge
Click
here to enlarge
|
PMOD-DA1 (PMOD-DA1)
The Digilent PmodDA1 Digital To Analog Module Converter Board (the DA1)
converts signals from digital to analog at up to one MSa per second.
The DA1 uses a 6-pin header connector and at less than one square inch is small enough to be located where the signal is needed.
The DA1 has four simultaneous D/A conversion channels, each with an 8-bit converter that can process a separate digital signal.
It is possible to send a single signal, such as a reset signal,
to all four channels simultaneously, but multiple unique signals cannot
be sent simultaneously.
- Four D/A conversion channels
- Very low power consumption
- Small size (0.80" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
IC:
|
two AD7303 8-bit D/A converter chips |
Connector(s):
|
6-pin header and 6-pin socket |
Support documents can be found at www.digilentinc.com
|