The PmodUSBUART module provides a USB to UART interface powered by the FTDI FT232RQ.
The PmodUSBUART uses the standard 6-pin connector to connect to the host
device and a micro USB connector to connect to a PC or other USB
capable device. The FTDI chip then converts the signal from UART to USB
and vice versa.
There are two UART signal pin assignment conventions in use on Digilent
products. This product uses the new signal assignment convention.
Connecting a product using the new convention with one using the old
convention requires the use of a UART Crossover Cable (not included).
Click here for a more detailed explanation.
- USB to serial UART interface
- Option to power the system board through the FTDI chip
- Ships with a 6" 6-pin cable, and a 6-pin header
|2x6 pin header
Support documents can be found at www.digilentinc.com